Brookfield, WI's Local Roof Repair & Roof Replacement Specialists

During our inspection at this home, we found a wealth of improperly installed products.  The chimney flashing was never done, step flashing in other sections was not installed, and there was a massive hole at the end of their valley which led to soffit & fascia damage.  When we did the roof, we were able to disassemble the soffit and fascia, and reassemble it after changing out the rotting wood beneath.  They now have a hole-free roof with proper flashing installed, and the unsightly soffit and fascia neatly restored.

Ron called us out to take a look at his failing chimney flashing.  While we were there, we looked over his whole roof and found many points of failure.  We recommended a full roof replacement, but they weren't quite ready for that, so we just replaced their chimney flashing for now.  While we were replacing the flashing, we built a proper cricket to divert water away from the base of the chimney, and we ended up having to install new decking surrounding the chimney since it had been leaking for so long.  They now have a beautiful new flashing, and we look forward to the opportunity to put a Klaus on their house in the future.

Jennifer had leaking coming from her chimney.  When we reviewed the area, we found the chimney flashing was old, and worn out.  The shingles alongside the chimney were also raised significantly, indicating something weird was going on underneath.  When we removed the flashing, we found it was not properly step flashed and there was no ice and water protector installed underneath!  These are two crucial aspects of flashing that, if left out or done improperly will lead to leaks.  We installed new step flashing, ice and water protection, and some new shingles around the damaged area.  Jennifer was happy to hear that we were able to solve her issue, and how we were able to do it.

The shingles and chimney flashing on this house were lifting because they weren't properly sealed.  As time went on, it only got worse.  The owner started to notice wet spots on her ceiling after the rains.  We replaced the entire roof with IKO shingles and used Ice and Water to protect her home.  We also replaced the chimney flashing.  Now she has a beautiful new roof and no leaks!

The owners to this home recently moved in and noticed several aspects about their roof that needed repair. They chose to focus on the chimney cricket and installing a ridge vent. Since this roof did not have a ridge vent to begin with, it was important to understand that ridge vents are the most efficient and cost-effective roof ventilation system around!

They already saw damage forming like cracks in the bricks and mortar joints, so to protect their chimney from any further water leaks into the attack or ceilings, we installed a new chimney cricket.

We removed the shingles behind the larger chimney down to the wood, removed the aluminum chimney flashing and existing tin shingles and framed out the cricket. We then installed an IKO Goldshield Ince and Water over the entire area. We installed new IKO shingles in emerald green around the affected area, and installed a new step flashing, apron flashing, and counterflashing.